English 69
Maint
enanc
e
03
5.
Remove the third sheet from the door in
the arrow direction.
6.
Clean the glass with soapy water and a
clean cloth.
02
03
01
01
Support clip 1
02
Support clip 2
03
Support clip 3
7.
When done, reinsert the sheets as
follows:
• See the picture and locate the hinges.
Insert sheet 3 below support clip 1,
sheet 2 between support clip 1 and
2, and sheet 1 into support clip 3 in
this order. Make sure the printed side
of sheets is inserted inward.
CAUTION
To identify the correct side of the sheet,
locate the “PYRO” mark on the corner of
every sheet.
Correct direction: PYRO-**-**
Wrong direction:
8.
After insert the sheet 2, press down the
glass clips and check if they secure the
glass sheet properly.
9.
Follow steps 1-2 above in the reverse
order to reinstall the coverings.
WARNING
To prevent heat leaks, make sure you
propery reinsert the glass sheets.
NV75J7570RS_EE_DG68-00615C-02_SV+NO+FI+DA+EN.indb 69
2016-05-18 �� 8:21:01
Summary of Contents for NV75J7570RS
