Samsung MultiXpress M4370 Series Service Manual Download Page 122

Page: 122 / 423

3. Disassembly and Reassembly

3.3.6. SMPS board

Remove the left and front cover. (Refer to 3.3.1, 3.3.3.)

Unplug all harness from the HVPS board. Remove 1
screw. And pull the power unit.

Release the power unit from the left rail.

Unplug the harness from the SMPS board.

Remove the HVPS board with its holder after removing
4 screws.

Unplug all harness. Remove 4 screws. And release the
SMPS board.

3-22

Summary of Contents for MultiXpress M4370 Series

















































































































































































































































































































































































































Search results

Summary of Contents for MultiXpress M4370 Series

Reviews:

Related manuals for MultiXpress M4370 Series

Brands by name

Popular brands

Samsung MultiXpress M4370 Series, Service Manual

Search results

Summary of Contents for MultiXpress M4370 Series

Reviews:

Related manuals for MultiXpress M4370 Series

Brands by name

Popular brands