manualshive.com logo in svg

Samsung ML-2150, User Manual

Share
Download
Samsung ML-2150 User Manual Download Page 82

U

SING

 P

RINT

 M

ATERIALS

4.

17

4

Printing on Labels

1

Open the Multi-Purpose Tray and the rear output tray.

2

Load labels 

with the print side up

. Adjust the guide to fit 

the width of the labels. 

Guidelines

• Only use labels recommended for laser printers.

• Verify that the labels’ adhesive material can tolerate fusing 

temperature of 200°C (392°F) for 0.1 second.

• Make sure that there is no exposed adhesive material 

between the labels. Exposed areas can cause labels to peel 
off during printing, which can cause paper jams. Exposed 
adhesive can also cause damage to printer components.

• Do not feed a sheet of label through the printer more than 

once. The adhesive backing is designed for one pass through 
the printer.

• Do not use labels that are separating from the backing sheet 

or are wrinkled, bubbled, or otherwise damaged.

Summary of Contents for ML-2150










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands