26 _ Disassembly and Reassembly
Part
Figure
Description
Rear Leg +
Adjust bar
Preparation :
•
Make sure to disconnect the power, water supply,
and drain hose connections.
•
Remove the upper & lower baskets in the
dishwasher.
•
Pull out the dishwasher & lay the dishwasher down
on its back.
•
Remove the shutter.
1.
Turn the rear leg adjusting screw clockwise until the
rear adjusting leg is fully extended.
2. Remove the screw that is holding the case gear to
the unit.
3. The case gear is made up of a worm gear and
helical gear. Pull out the worm gear first.
4. Grab the adjusting bar and pull it out while pushing
the helical gear from the backside.
The adjusting leg bar is attached to the base by a
hook, which is indicated in the red circle in the the
image to the left.
