34
- English
5
Press the REC button.
To pause recording
Press the REC PAUSE button to pause a recording in
progress.
●
Press the REC PAUSE button again to resume
recording.
●
You can switch channels by pressing the
CH
(
/
)
buttons while recording pauses.
To stop recording
Press the STOP (
) button to stop or finish a recording
in progress.
●
When using DVD-RAM/DVD-RW/DVD-R discs, the
message
‘Updating the information of disc. Please wait for a
moment’ is displayed.
Recording from external
equipment you are watching
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close the
disc tray.
Wait until “LOADING” disappears from the front panel
display.
If an unused DVD-RAM disc is used, whether to format
or not will be asked first. (See page 31)
If an unused DVD-RW disc is used, whether to initialize
or not will be asked first. (See page 31)
3
Press the INPUT button to select the input
source according to the connection you
made.
The front panel display changes in the following
sequence:
➞
Channel Number
➞
L1
➞
L2
➞
DV
If you connect a digital camcorder, press the
INPUT button to select DV.
4
Press the REC MODE button repeatedly, (or
Press the REC MODE button and then press
the
…†
button) to select the recording
speed(quality).
➞
SP
➞
LP
➞
EP
➞
XP
Before you start
Record Mode
SP
■
You can not change the recording mode
and input source while recording.
■
Recording will stop automatically if there
is no free space left for recording.
■
Up to 99 titles can be recorded onto a
disc.
■
Recording will stop automatically if a copy
protected image is selected.
■
DVD-RAM/DVD-RW discs must be
formatted before starting to record.
Most new discs are sold unformatted.
■
Do not use DVD-R authoring discs with
this unit.
NOTE
R
ecording
