14
- English
A Quick Overview presented in this guide will give you
enough imformation to start using the recorder.
C
onnecting &
S
etting Up
Quick Overview
Quick Overview .....................................................14
Step 1 : Unpacking.................................................15
Step 2 : Connecting the Antenna cable
..............
15
Step 3 : Connecting the Video cable.....................16
Step 4 : Connecting the Audio cable ....................18
Step 5 : Connecting the external devices .............20
Step 6 : Connecting the Power cord.....................21
Step 7 : Preparing the Remote Control.................21
Step 8 : Initial Setup...............................................23
This section involves various methods of
connecting the DVD player to other external
components and required initial setting modes.
Step 1 : Unpacking
Step 2 : Connecting the Antenna Cable
Step 3 : Connecting the Video Cable
Step 4 : Connecting the Audio Cable
Step 5 : Connecting the external devices
Step 6 : Connecting the Power Cord
Step 7 : Preparing the Remote Control
Step 8 : Initial Setup
†
†
†
†
†
†
†
●
Note to CATV system installer:
This reminder is
provided to call CATV system installer’s attention to
Article 820-40 of the National Electrical Code
(Section 54 of Canadian Electrical Code, Part I), that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building as
close to the point of cable entry as practical.
C
onnecting & Setting UP