EB 8048-2/-3 EN
7
Safety instructions and measures
Referenced standards and regulations
The control valves meet the requirements in the Regulation (EC) No. 1935/2004 for materi-
als and articles intended to come into contact with food
The control valves comply with the requirements of the European Pressure Equipment
Directive 2014/68/EU. This declaration of conformity is included in the Appendix of these
instructions (see section 10.2).
According to the ignition risk assessment performed in accordance with EN 13463-1:2009,
section 5.2, the non-electrical control valves do not have their own potential ignition source
even in the rare incident of an operating fault. As a result, they do not fall within the scope of
Directive 2014/34/EU.
Î
For connection to the equipotential bonding system, observe the requirements specified in
section 6.4 of EN 60079-14 (VDE 0165 Part 1).
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
−
Mounting and operating instructions for mounted actuator, e.g.
u
EB 8310-X for
Type 3271 and Type 3277 Actuators or
u
EB 8315 for Type 3379 Actuator
−
Mounting and operating instructions for mounted valve accessories (positioner, solenoid
valve etc.) e.g.
u
EB 8395 for Type 3724 Positioner
−
u
AB 0100 for tools, tightening torques, and lubricant
1.1
Notes on possible severe personal injury
DANGER
!
Risk of bursting in pressure equipment.
Control valves and pipelines are pressure equipment. Improper opening can lead to
valve components bursting.
Î
Before starting any work on the control valve, depressurize all plant sections
concerned as well as the valve.
Î
Drain the process medium from all the plant sections concerned as well as the
valve.
Î
Wear personal protective equipment.
