EB 8310-5 EN
7
Safety instructions and measures
Referenced standards and regulations
According to the ignition risk assessment performed in accordance with EN 13463-1:2009,
section 5.2, the non-electrical actuators do not have their own potential ignition source even
in the rare incident of an operating fault. As a result, they do not fall within the scope of Di-
rective 2014/34/EU.
Î
For connection to the equipotential bonding system, observe the requirements specified in
section 6.4 of EN 60079-14 (VDE 0165 Part 1).
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
−
Mounting and operating instructions for the mounted valve
−
Mounting and operating instructions for mounted valve accessories (positioner, solenoid
valve etc.)
−
Safety Manual
u
SH 8310 for use in safety-instrumented systems
−
u
AB 0100 for tools and lubricant
1.1 Notes on possible severe personal injury
DANGER
!
Risk of bursting in the actuator.
Actuators are pressurized. Improper opening can lead to actuator components burst-
ing.
Î
Before starting any work on the actuator, depressurize all plant sections concerned
and the actuator.
Summary of Contents for 3277
Page 46: ...46 EB 8310 5 EN...
Page 47: ...EB 8310 5 EN 47...
