Maintenance
582195110-Complete_Pump-PRIMA-01D100-EN-indA
71
Step 20
Apply glue to the threads of the 4 screws (8) and screw them
by means of a 10 mm torque wrench to reinstall the distributor
on the motor body.
Screwing torque : 7.5 N.m / 5.5 ft /lbs.
Caution: If the screws (8) do not slide into their
housings, there will be play between the parts. This is due to
incorrect assembly of the lower plug (30) with the spring (36).
Repeat the steps for reassembling the seals, air valve spool,
plugs, spring,… to finalize the reassembly of the screws (8).
Step 21
Reinstall the seals (24 and 26) greasing the entire seal contours
evenly with grease.
Reinstall the pilot-spool (23) and the pilot-spool sleeve (25) by
pushing them.
Reassembly of the diaphragms and the pilot-spool
- Time required
5 minutes
Loctite
222
Kluber petamo
HY 133N
Summary of Contents for PRIMA 01D100
Page 85: ...Spare parts 582195110 Complete_Pump PRIMA 01D100 EN indA 85 10 1 Exploded overview...
Page 87: ...Spare parts 582195110 Complete_Pump PRIMA 01D100 EN indA 87 10 3 Upper part and exhaust valves...
Page 88: ...Spare parts 582195110 Complete_Pump PRIMA 01D100 EN indA 88 10 4 Lower part and suction valves...
Page 89: ...Spare parts 582195110 Complete_Pump PRIMA 01D100 EN indA 89 10 5 Distributor...
