SAMES KREMLIN PRIMA 01D100, User Manual

Page: 15 / 108

Safety instructions
582195110-Complete_Pump-PRIMA-01D100-EN-indA 15
Environment
The equipment is installed on a horizontal, stable and flat floor (e.g.
concrete slab).
Non-movable equipment must be fixed to the ground by suitable
mounting devices (spit, screws, bolts, etc.) to ensure its stability during
use.
To avoid risks due to static electricity, the equipment and its
components must be grounded. The rods are conductive.

For pumping equipment (pumps, lifts, chassis, etc.), a 3.3 mm
section wire is attached to the equipment. Use this wire to
connect the equipment to the general “ground”. In the case of
severe environments (insufficient mechanical protection of the
earthing wire, vibrations, moving equipment, etc.) where
damage to the earthing function is likely, the user must replace
the 3.3 mm wire supplied, by a device more suited to its
environment (larger wire section, earth braid, fixing by eye
lug,…).

Have the ground continuity checked by a qualified electrician.
If ground continuity is not assured, check terminal, wire and
grounding point. Never operate the equipment without first
resolving this problem.

The gun must be ‘grounded’ through the air hose or fluid hose.

The equipments to be painted must also be ‘grounded’ by
means of clamps fitted with cables or, if suspended, by means
of hooks which must be kept clean permanently.
Note: all objects in the work area must also be grounded.

Do not store more flammable materials than necessary inside the
work area.

These materials must be stored in approved, grounded
containers.

Use only grounded metal pails for flushing solvents.

Cardboard and papers are to be banned . They are very bad
conductors, even insulators.