![background image](http://html1.mh-extra.com/html/salvis/profiline-plggh-series/profiline-plggh-series_operating-instructions-manual_804161029.webp)
en
29 / 44
4.1
Getting ready for use
CAUTION! Risk of crushing!
Take the nec
essary precautions when removing/installing the
parts! Note the weight of the parts!
.
Hook in the left and right removable rack.
.
Insert the heat conduction plate.
.
Open the on-site gas tap.
.
Open the gas tap on the appliance.
Closed
Open
4.2
Ignite the pilot light and burner
DANGER! If there is a smell of gas, do not ignite the gas flame!
Risk of explosion!
.
Shut off the gas tap on site!
.
Do not switch on or off electrical appliances!
.
Open windows and doors! Thoroughly ventilate the room with a draught!
.
After sufficient ventilation, determine the location of escaping gas!
.
Inform the standby service of the gas network operator!
.
Open the baking oven door.
● When the appliance has not been used for a
longer period of time: e. g. the main shut-off
device was closed, it may take slightly longer
before the pilot light ignites (the gas supply
has to fill up with gas again).
.
Press in and hold the gas control, turn to igni
tion symbol
.
.
Whilst pressing the gas control, repeatedly
press the piezo spark ignition until the pilot
light starts burns.
● Check the pilot light. See the hole in the heat
conduction plate!
.
After igniting the pilot light, keep the gas con
trol pressed for approx. 5 - 10 seconds,
‒ so that the thermocouple can sufficiently
heat up and
‒ the gas supply is not automatically shut off
again (automatic safety pilot).
.
After the ignition procedure, release the gas
control and rotate to the temperature required.
Heat conduction plate
Gas tap
Hook the
removable
rack
Heat
conduction
plate
Hole for checking the pilot light and
burner flame