![background image](http://html1.mh-extra.com/html/salvis/profiline-plggh-series/profiline-plggh-series_operating-instructions-manual_804161039.webp)
en
39 / 44
9.6
Positioning the pilot burner
Pilot burner
Gas burner
Gas burner
Pilot burner
Observe the dimension of 10 mm!
Observe the dimension of 2 mm!
Observe the dimension of 3
mm!
9.7
Replace nameplate
● After changing the type of gas, the changed
type of gas must be documented on the
device.
● When the nozzle sets are delivered, a blank
label is included to identify the types of gas.
.
Indicate the type of gas used on the label.
.
Degrease the old label before bonding.
.
Bond the new label with the actual
identification onto the old label.
Label, types of gas
‒ in the device
‒ in the base unit