en
37 / 44
9.2
Remove front panels from the baking oven
Required to replace the external nozzle or adjust
ing the primary air.
Front panels must only be removed by authorized
customer service or gas fitter!
.
Remove the clamping cam.
.
Remove the top and side screws from the front
panel.
.
Release the screws below the front panel.
.
Remove the right front panel and place so that
the cable of the piezo ignition must not be dis
connected and cannot be damaged.
9.3
Replace external nozzle, set primary air
Screw for attaching
the primary air sleeve
External nozzle
Nozzle holder
Set primary air =
dimension H in mm
Primary air sleeve
Heat-resistant securing lacquer
Remove front panels, refer to page 37 Chapter 9.2
.
Determine external nozzle, refer to information in the table, page 36 Chapter 9.1.2
.
Set primary air (H), refer to information in the table, page 36 Chapter 9.1.2
.
Apply heat-resistant securing lacquer on attachment screws and primary sleeve.
.
Check all gas-bearing parts for tightness.
Release the screws
Remove the top
and side screws
Piezo spark
ignition
Clamping
cam (gas
regulator)
Front panels
