![background image](http://html1.mh-extra.com/html/salvis/pl880978/pl880978_operating-instructions-manual_804158032.webp)
en
32 / 52
Insert the U-channel (e.g. for wall setup)
A second person is required to hold the U-channel
during assembly.
CAUTION! Risk of injury, risk of
crushing!
Risk of crushing limbs during as
semble!
.
Exercise appropriate caution!
.
Wear protective gloves!
.
Set up the appliances with 20 mm clearance to
the wall.
.
Place appliances and adjacent appliance with
a clearance next to one another so that it is
still possible to insert the U-channel from the
top.
● For example, for U-channel 100 mm maintain
a minimum clearance of 110 mm.
.
Insert the U-channel:
1. Put the U-channel in position between the
appliances, below the top part of the appli
ance and hold in this position.
2. Push the appliance to the adjacent appli
ance until the U-channel rests on the side
wall of the appliance on both sides.
3. Rear: Push in the U-channel upwards into
the left and right top part.
4. Rear: Install the straps in the top part. Push
the U-channel forwards.
5. Front: Push the U-channel upwards to the
stop.
.
Aligning appliances: Flush horizontal and front
vertically.
Install front cover
.
Install the cage nut.
.
Insert the front cover below the U-channel.
.
Attach the front cover with four screws.
U-channel
( 1.)
( 2.)
( 3.)
( 5.)
( 4.)
U-channel
Tab
Upper section of
the appliance
U-washer
Front cover
Screw
U-channel
Cage
nut
Summary of Contents for PL880978
Page 49: ...49 52 ...
Page 50: ...50 52 ...
Page 51: ...51 52 ...
Page 52: ...PL881130 10 13 1 19 SALVIS AG Nordstrasse 15 CH 4665 Oftringen www salvis ch smart cooking ...