Tel: 886. 909 602 109 Email: [email protected]
www.salukitec.com
71
Fig.52 SE2031 Software Interface
5.2 Software Guide
1. Begin to Run
In Fig.53, if you see [Connecting] as (left), it means the program is running. If you see [Connect] as (right), it
shows the program is broke down.
You can click the button
to switch between these two statuses.
Note that before the program runs, the Baud rate of the SE2031 should set to 921600bd.
Fig.53 (left) Program is running (right) Program stops
2. Connection
This part shows you how to connect the PC and the SE2031.
As is shown in Fig.54, click the button
.
