Tel: 886. 909 602 109 Email: [email protected]
www.salukitec.com
55
<USB>:
The communication interface is square USB.
<RS232>:
The communication interface is a 9-pin male serial port..
There are 3 function settings in the submenu, including <Baud Rate>, <Word Length> and <Parity>.
<Baud Rate>
Setting the baud rate.
Press the corresponding soft keys and knob to adjust the baud rate. The value can be set as
<600>, <1200>, <2400>, <9600>, <19200>, <38000>, <43000>, <56000>, <57600>,
<115200>, <230400>, <380400>, <460800> and <921600>.
<Parity>
Setting the parity.
<Even>
Even
<ODD>
Odd
<NONE>
nothing
Note that using <USB> and <RS232>, the local SE2031 can communicate with another
SE2031 or the PC. More details are talked at ‘CHAPTER 4 REMOTE PROGRAMMING’.
3.9.4 < Reset? >: The Lock-in Reset
Press the corresponding soft key and the system will be restarted.
3.10
[AUTO SET]
There are 4 settings in [AUTO SET] submenu, including <Auto Reserve>, <Auto Gain>, <Auto Phase> and < Auto
Scale >, as is shown in Fig.46.
Fig.46 [AUTO SET] Submenu
