57
Tel: 886.909 602 109 Email: [email protected]
Figure 9-5 System Timing Shutdown Function
9.5.
Display
To better handle different testing scenarios for operators, S3101 Cable & Antenna Analyzer provides several kinds of display functions
and backlight brightness adjustment function. You may adjust display and brightness of instrument according to testing environment.
Setting steps of instrument display mode are as follows:
1) Press
【
SYSTEM/LOACL
】
key and enter system menu bar;
2) Click [Display] menu and enter menu bar;
3) Click display mode on corresponding display menu bar according to testing environment.
Display mode of Analyzer is set to be normal mode by default, you may select appropriate testing environment. If testing outdoor, you
may click [Outdoor Mode] menu on menu bar; if testing at night, you may click [Night Mode] menu on menu bar. Several kinds of screen
display modes are as below separately:
Figure 9-6 Normal Mode
