52
Tel: 886.909 602 109 Email: [email protected]
conveniently; you may also click [Del] menu to delete some trace. You may click [Del all] menu to delete all traces. You may recall
previous-stored traces (Traces recalled displayed are green in color) and perform comparison with currently measured trace via menu
under
【
Trace
】
key. The figure below shows the ratio between trace recalled and current tested trace.
Figure 8-6 Current Trace/Recalled Trace
8.5.
Screen shot
You may observe testing data under some circumstances more directly or use image data while drafting documents in the future as
Analyzer provides Screen Capture function. You may get an easy access to obtain data results of current testing and restore it in image
format. If you want to take a Screen Capture for display interface of current testing data, you may operate as follows:
1) Press
【
Save/Recall
】
.
2) Click [Save Pic] menu on Save/Recall menu bar via touch screen, then click [Print Screen] to bring up a dialog box of “Input Picture
Name”. You may input an appropriate name for Screen Capture and click “OK” key on screen or
【
Enter
】
key to complete trace
storage. The save picture will be stored in location set in Section 8.2
Figure 8-7 Screen Capture
