34
Tel: 886.909 602 109 Email: [email protected]
Additionally, during editing process, the limit test function has opened automatically, a single or all limit point can be deleted by clicking on
[Del Point] or [Del All]; when there is no limit point, the limit test will automatically close. Figure 5-11 shows the limit line test fails.
Figure 5-11 Limit Test
5.6.3.
Limit Line Store & Recall
The specific limit line store and recall steps are shown as follows:
Press
【
Limit
】
key to enter the limit menu bar. Then click the touch screen [Save] menu to input the file name in the popped out
box and then press
【
Enter
】
key to complete limit line store.
Press
【
Limit
】
key to enter the limit menu bar. Then click the touch screen [Recall] menu to select the limit line in the popped out
limit line file list and then press
【
Enter
】
key to complete limit line recall.
5.7.
Marker
In order to facilitate the measurement data reading, and search for specific measurement values, the Analyzer provides six separate
markers for each window.
5.7.1.
Turn on a marker
1) Press
【
Marker
】
key to enter marker menu bar;
2) Click the touch screen [Marker 1 2 3 4 5 6] menu to select the corresponded markers, and then click [Marker Off On] menu to
separately open the corresponded marker.
Figure 5-12 Marker Switch & Setting
