41
Tel: 886.909 602 109 Email: [email protected]
Figure 6-1 Return Loss Measurement
6.3.
Cable Loss Measurement Setting
1) Press
【
Meas
】
key, click [Cable Loss] menu to set the instrument measurement format as cable loss.
2) Press
【
Freq/Dist
】
key and input the frequency range to be measured, that is start frequency and stop frequency.
3) Press
【
Cal
】
key to select the appropriate calibration kit to complete the calibration.
4) Connect the Analyzer to the DUT of which the terminal is antenna (in cable loss measurement, DUT shall connect the short circuit).
5) Press
【
Ampt
】
key and input the top-bottom coordinate figure or directly select the auto scale, to facilitate a better observation of
measurement curve.
6) Press
【
Marker
】】
key to set the appropriate marker.
7) Press
【
Limit
】
key to set an appropriate limit line .
8) Press
【
Save/Recall
】】
key to store the current measurement results to the memory to facilitate later recall.
Figure 6-2 Cable Loss Measurement
