38
Tel: 886.909 602 109 Email: [email protected]
Figure 5-16 Simultaneous Display of Two Data Formats
Each window can set separately the trace marker.
Frequency setting of the two windows is in synchronized association
DTF parameters of the two windows are in synchronized association.
5.9.
Trace
The Analyzer provides two types of mathematical operations for the currently active traces and reference traces; and provides three kinds
of trace display methods.
5.9.1.
Obtain a Reference Trace
Before performing any type of trace operation, it must store a reference trace in memory, which can be obtained through recall of trace
file and as which the current trace is set.
5.9.1.1.
Save current trace as reference trace
1) Press
【
Trace
】
key to enter trace menu bar;
2) Click the [Data → Memory] menu, to store the current measurement trace in memory as a reference trace.
5.9.1.2.
Recall a trace from a file:
1) Press
【
Save/Recall
】
key to enter Store/Recall menu bar;
2) Click [Recall Trace] menu to select the trace in the file list popped up, and then click [Recall] or press
【
Enter
】
to recall the selected
trace.
5.9.2.
Trace Operation
The Analyzer provides D-value and ratio mathematical operation
1) Press
【
Save/Recall
】】
to enter Save/Recall menu bar;
