– 62 –
3. PERIODIC MAINTENANCE
(6) As required
⑤
Air cleaner
When the red float of the dust indicator reaches the service level (a mark on the indicator),
clean the element as described below:
1) Pull the clip and turn the cover 12 degrees counter clockwise to remove it. With draw the
element.
2) Blow compressed air from inside of the element.
WARNING
Exercise caution not to get a speck of dust in your eye.
3) Check the element for any damage and replace as necessary, before pushing the dust
indicator reset botton.
4) Reinstall the element and fix the cover with the clip.
Turn the cover 12 degrees clockwise and push in the clip to fit it.
NOTE: In normal use, change the other element once in every six cleanings.
CAUTION
Replace the element when the red float reaches the service level even if it is cleaned.
Dust indicator
Element (INNER)
Element (OUTER)
Clip
Summary of Contents for SV410-2
Page 4: ......
