Sakai SV410-2, Operator'S Manual

Page: 37 / 77

– 32 –
2.3.4 Traveling
CAUTION
While travelling, do not turn the starter switch OFF.
WARNING
• When starting, operate the horn after securing
the safety around the machine.
• Be sure to wear the seatbelt doring operation.
1) Select the desired speed by the speed change switch.
( ) (Low) (High)
Speed 0
〜
7 (0
〜
4.3) 0
〜
6 (0
〜
3.7) 0
〜
10 (0
〜
6.2)
km / h (mile / h)
IMPORTANT
Be sure to shit gears while the vehicle is being stopped. Do not shift gears during
running.
WARNING
On a steep slope, run the machine at low speed. Do not attempt to shift speed while
travelling.
2) Speed up the engine by pulling the throttle lever
towards you.
3) Press down the parking brake switch button to release
the brake. Check that indicator lamp on the monitor
display goes off.
Applied
Released
REVERSE
SLOPE
OPERATION
Speed change switch
REVERSE
SLOPE
OPERATION
TRAVEL MODE
– 33 –
Ⓝ
Neutral
Ⓡ
Ⓕ
Reverse
Forward
Ⓝ
Neutral
Ⓡ
Ⓕ
Reverse
Forward
Applied
Released
4) Move the F-N-R lever in the direction to travel, and the
machine will begin traveling.
CAUTION
Avoid abrupt operation of the F-N-R lever.
NOTE: The travel speed can be controlled by the throttle
lever and F-N-R lever.
WARNING
Pay extreme attention to the area behind the machine when backing, since the
space just behind it tends to be a blind spot.
2.3.5 Stopping / Parking
WARNING
• Avoid abrupt braking. Leave enough space for braking safely.
• Avoid parking on a grade.
• If necessary to park on a grade, block the drums to prevent unexpected moving
down the grade.
1) Bring the F-N-R lever to the neutral position
Ⓝ
, and the
machine will come to a halt.
CAUTION
For normal braking, move the F-N-R lever back to
the neutral position. In an emergency, depress the
brake pedal.
IMPORTANT
After depressing the brake pedal, return the F-N-R
lever to the neutral position, otherwise the vehicle
will not start.
2) Press the parking switch button securely, and check
that indicator lamp illuminates.