Sakai SV410-2, Operator'S Manual

Page: 31 / 77

– 26 –
2.2 Handling and Adjustments
2.2.1 Seat adjustment
Adjust the seat for your best operating position. Move
the lever as shown by arrow. With the lever held in that
position, slide the seat forward or backward as desired.
When properly adjusted, release the lever.
Adjust your seat position to suit you as follows:
1) Pull the lever
①
and adjust seat position longitudinally.
2) Turn the backrest adjust dial
②
for optimum angle.
3) Move the suspension lever
③
to select suitable
suspension for your body weight.
WARNING
The adjustment will be necessary when operating the machine first or when
operators are alternated.
IMPORTANT
Be sure to wear the seatbelt during operation.
– 27 –
2.2.2 Scraper adjustment and replacement
SV410D
-2
1) Clearance adjustment of scraper
Ⓐ
①
Loosen bolts and nuts
Ⓑ
at 8 locations.
②
Provide a clearance of 20 mm between scraper and
the drum.
③
Retighten bolts and nuts
Ⓑ
at 8 locations.
2) Clearance adjustment of scraper
Ⓒ
①
Loosen bolts
Ⓓ
at 8 locations.
②
Provide a clearance of 20mm between scraper and the drum.
③
Retighten bolts
Ⓓ
at 8 locations.
SV410T
-2
, SV410TB
-2
1) Clearance adjustment of scrapers
Ⓐ
①
Loosen bolts and nuts
Ⓑ
at 4 locations.
②
Provide a clearance of 20mm between scrapers
Ⓐ
and the drum.
③
Retighten bolts and nuts
Ⓑ
at 4 locations.
2) Replacement of scrapers
Ⓐ
(9 pieces on top and 9
pieces at bottom.)
①
Remove bolts and nuts
Ⓒ
.
②
Replace scrapers
Ⓐ
with new ones.
③
Refit and retighten bolts and nuts
Ⓒ
.
SV410TF
-2
, SV410FB
-2
1) Clearance adjustment of scraper blades
Ⓐ
.(One at the
right and one at the left)
①
Loosen bolts and nuts
Ⓑ
(8 locations respectively at
top and bottom)
②
Provide a clearance of 20
mm
between scrapers
Ⓐ
and the drum.
③
Retighten bolts and nuts
Ⓑ
(8 locations respectively
at top and bottom)
2) Replacement of scraper blades
Ⓐ
①
Remove bolts and nuts
Ⓑ
(8 locations respectively at top and bottom)
②
Replace scraper blades
Ⓐ
with new ones.
③
Refit and retighten bolts and nuts
Ⓑ
(8 locations respectively at top and bottom)
SV410TF-
2
SV410FB-
2
Ⓐ
Ⓑ
Ⓐ
Ⓑ
SV410T-
2
SV410TB-
2
Ⓐ
Ⓐ
Ⓑ
Ⓒ
Ⓒ
SV410D-
2
Ⓐ Ⓒ Ⓓ Ⓑ