– 56 –
3. PERIODIC MAINTENANCE
Center pin and tilt pin bearings
Apply grease at 4 locations.
Cylinder head and anchor pins
Apply grease at 4 locations.
The steering cylinder is provided on both sides of the
machine.
Differential and final drive
Check for oil level, and add oil through the fill port as necessary.
〈
Differential
Ⓐ〉
Fill port plug and Level plug
(Fill port and Level port)
Level plug
(Level port)
〈
Final drive
Ⓑ〉
Ⓑ
Ⓐ
– 57 –
3. PERIODIC MAINTENANCE
(4) Every 500 hours
⑥
Fuel pre - filter
Change the pre - filter.
IMPORTANT
Pay attention to the direcion of installation when
installing the filter.
⑫
Hydraulic oil return filter
⑭
Hydraulic oil line filter
Change the elements.
⑬
Control link
1) Check the nuts for looseness. Adjust the rod.
2) Apply grease to F-N-R lever shaft.
Return
filter
Line
filter
Fuel pre-filter
Summary of Contents for SV410-2
Page 4: ......
