Saipa Tiba 2, Owner'S Manual

Page: 113 / 147

7
113
Lamps Replacement
OWM121 OWM119 OWM120
Rear light bulb replacement
1- Remove the trunk carpet and
the three nuts of the rear light as-
sembly to detach.
2- Detach carefully the rear light
assembly from the vehicle.
3- Turn the bulb holder counter-
clockwise to remove the bulb
from the light assembly housing.
4- By pushing the bulbs slightly,
turn it a quarter counter-clockwise
and pull it out.
5- Place the new bulb inside its
holder and turn it a quarter clock-
wise by slightly pushing it to fix
the bulb in its place.
6- Place the bulb holder inside
the rear light assembly and turn
it a quarter clockwise to fix the
holder in its place.
7- Install carefully the light
assembly in its place.
Replacing stop lamp
1- Open the trunk lid.
2- Remove nuts and bolts at the
back of light.
3- Remove lamp assembly.
4-Push two pins and remove
black rails of lamps from its place.
5- Install lamp assembly on their
place.
6- Replace new lamp and place it
on its own place.
Room light bulb replacement
1- By levering a regular screw
driver remove the transparent
plastic cover of the room light
gently, as shown in the figure.
2- Push the spring holder of the
bulb to remove it.
3- Install a new bulb in its place
by sliding the bulb in its holder.
4- Insert the transparent plastic
cover of room light by properly
adjusting its projections into the
slots of the room light housing.