Saipa Tiba 2, Owner'S Manual

Page: 63 / 147

4
63
Signalling high-beam
head-lamps
To use the signalling high-beam
headlamps pull the control lamp
lever toward yourself as shown
in the figure and then release to
return it to its initial position.
When signalling by high-beam
headlamps, it is not necessary
to set the lamps in ON position
OWM073
Lamps
Rear Fog Lamps
To turn the rear fog lights on,
turn the headlights on and then
depress the rear fog lights switch
located on the console switch
panel. To turn it off, depress it
again or turn the headlights off.
Turn signal lamps
To turn on the turn signal lamps,
the ignition switch must be set in
ON position. As shown in the figure,
when turning right push up the
control lever and when turning left
push down it.
The signal lever includes two
stages:
First stage - This stage is related
to changing line and passing the
vehicle in front of you.
Second stage
-This stage is related
to the full displacement of the lever
when turning left or right. It returns
to its initial position after complete
steering wheel turn. If the turn signal
lamps stay on after turning, return the
lever to its initial position manually.
OWM075 OWM074