Saipa Tiba 2, Owner'S Manual

Page: 108 / 147

7
108
Tires and wheels
Tires and wheels
Attention:
- The warm tire inflation pressure is
larger than the cold one. Therefore,
do not use warm tire to adjust its
inflation pressure, otherwise after
cooling the inflation pressure will be
lower than the specified limit.
- If the tire inflation pressure
becomes lower than the specified
limit, the wear rate of the tire and
the fuel consumption will increase
and the control of the vehicle will be
difficult. Also, low inflation pressure
tire can explode and its sealing with
ring will not be enough. If the tire
inflation pressure becomes much
lower than the minimum specified
value, it will cause deformation of
wheel or separation of tire; therefore,
keep the tire inflation pressure in the
specified limit. If the tire inflation
pressure continuously reduces,
consult an authorized SAIPA dealer
or a puncture shop.
- The tire inflation pressure more than
the specified limit causes knocking
during driving, difficulty in vehicle
control, wear in the tire middle part,
and more likely of overturn.
Warning
The tire inflation pressure more
or less than the recommended
limit reduces the tire life time
and causes bad handling of the
vehicle in driving. Also, it can
cause tire cut or blow up resulting
in loose of the vehicle control.
Environment and vehicle
Tire
If only one of the vehicle tires has
pressure drop, say 6 psi (0.4 bar
approximately), and the others
have standard pressure, the fuel
consumption increases to 3% and
the life of that tire would decreases.
You can reduce the fuel
consumption to 6% by regulating
the tire pressure.
OWM111
Attention
When replacing tires, do not
use different kinds of tires
simultaneously (such as radial,
bias and …) and be careful all
four tires of the vehicle to be at
the same size, design, and type.
Only use the tires recommended
by the factory.