Saipa Tiba 2, Owner'S Manual

Page: 94 / 147

6
94
Warning
To replace the tire and repair, pull
the vehicle completely off road.
- If you are not able to replace the
flat tire, get a mobile serviceman
to help.
- Do not overload the jack
- For jacking use the specified
locations. Be careful do not use
other locations such as bumper
underneath for jacking.
- When you have raised the
vehicle using jack, do not get
under the vehicle. Be careful
do not get any part of your body
under the vehicle.
- When jacking the vehicle, do
not start the engine.
- To prevent any damage or
danger, only use the jack inside
the vehicle, in the specified
jacking locations.
Replacing Tires
OWM099
OWM100
Jacking location under the
vehicle
Locate the jack at the jacking
positions indicated at the both
sides of the vehicle near the tire
to be replaced.
- Make sure that the jack is
located on a smooth and
horizontal surface.
- Do not use the jack while
there is a passenger inside the
vehicle.
- Make sure that the front wheels
are completely straight ahead.
- Apply the parking brake and
shift into the first gear.
Jacking under the vehicle
1- Loosen the wheel nuts by
wheel wrench.
2- Using the jack and raise
the vehicle far enough off
the ground so that the tire
detaches from the ground.
3- Remove the wheel nuts and
take off the tire.
4- Replace the flat tire with the
spare and tighten the wheel
nuts manually as far as you can.
5- Lower the jack and re move
it from the underneath of the
vehicle.
6-Tighten firmly all the wheel
nuts in a criss-cross sequence.
7- Place the tools inside their
box and the tire in its proper
location inside the trunk.