Saipa Tiba 2, Owner'S Manual

Page: 112 / 147

7
112
Lamps Replacement
Headlamps replacement
1- Open the engine hood.
2-Detach the headlamp
assembly from the body by
opening its two screws.
3- Detach the connectors from
the headlamp assembly.
4- Turn the bulb holder counter-
clockwise to detach.
5- Detach the lamp connector.
6- To detach the front bulbs, push
its metal pin end to remove from
its place.
7- Pull out the bulbs from the
headlamp assembly.
8- Install the new bulb and fix it
by its metal pin in its place.
Warning
Halogen bulbs
- When replacing the bulb, use
safety goggles.
- Before replacement let the
bulbs cool down.
- The halogen bulbs contain
compressed gas and if they are
broken, they burst and broken
glasses may scatter everywhere.
- Always work carefully on the
halogen bulbs to prevent any
impact and resulting injuries.
OWM117
OWM118
- Be careful when the bulb is on,
it dose not contaminate with the
liquids.
- Do not touch the bulb with bare
hands at all. It may become too
hot due to the contaminants
and burst.
- Notice that only when the bulb
is installed inside the headlamp
assembly in its place, you can
turn it on.
Warning
Front turn signal bulbs
replacement
1- Detach front light assembly
from the body.
2- Pull out the turn signal bulb
holder from the front light
assembly.
3- To remove the bulb, pull it out
from its holder.
4- Insert the new bulb into its
holder.