Saipa Tiba 2, Owner'S Manual

Page: 102 / 147

7
102
Engine oil and filter
Engine oil level check
1- Stop the vehicle on a flat
surface.
2- Start the engine until its
temperature reaches at normal
working temperature.
3- Turn off the engine and wait
until the oil drains back into the
oil pan.
4- Pull out the dipstick and clean
it, then push it back in all the way.
5- Pull out the dipstick again and
check the oil level. It must be
between marks F and L.
Warning
- Long term contact of the
used engine oil with the skin
can cause cancer. Therefore,
after touching the used engine
oil, wash your hands up with
soap and water.
- Keep all used engine oil out
of children reach.
If the oil level is at L or close to
it, add enough engine oil until its
level stays at F. Notice that do
not add too much oil.
Only use the right kind of
engine oil (refer to the section
of recommended oils in this
chapter).
OWM107
Environment and vehicle
Engine oil
- Prevent environment pollution
by furthered replacement of the
engine oil.
- The engine oil color is not
the only criteria for defining its
quality and replacement.
- The base of many engine oils
is the crude oil. So conserve
the resources by optimized
consumption.
- Be careful about the leakage
when replacing the engine oil.
Avoid pouring the used oil on
the soil and through the water.