Saipa Tiba 2, Owner'S Manual

Page: 84 / 147

6
84
Protection of electrical circuits
1- Regular fuse
1- A-Normal
1- B-Melted
2- Main fuse
2- A- Normal
2- B- Melted
Fuses
Fuses are simple connectors
which disconnect the current
when over current occurs to
protect the electrical equipment
from damage.
This vehicle has two fuse boxes,
one inside the passenger
OWM087
compartment at the left hand
side of the driver (lower part of
the dashboard) and the other one
inside the engine compartment
near the battery.
The table of fuses inside these
two blocks will be indicated in
this section.
If any parts of lighting system,
auxiliary equipment, or control
units do not function, check the
fuse of the corresponding circuit.
Notice that if any fuse breaks,
its band metal melts and it has
to be replaced with a new one of
the identical size and rating.
If the new fuse breaks again, it
indicates that there is a problem
in the electrical system of the
vehicle.
Therefore, do not use that
electrical system and consult
an authorized SAIPA dealer as
soon as possible.
Warning
Warning
- Be careful not to use a
wire instead of a fuse even
temporarily.
This can damage the electrical
system or cause fire.
- If one of the electrical systems
of the vehicle does not function,
first check the fuse box inside
the vehicle at the left hand side
of the driver.
- Only use a new fuse with the
identical size and rating when
replacing a broken fuse.
- Using a high rating fuse can
cause damage and even fire.