Proc Sheet 4 01
myZ-5
5HPRYHDQG3ODFHWKH,2FRQQHFWRU
1/3
1RWLFH
The handsets requiring the replacement of system connectors cannot be repaired under
Sagem warranty.
The eventual deterioration of the board due to a bad replacement of the connector fall under the
Repair Centre responsibility.
5HSODFHPHQWSURFHGXUHRI'$7$$8',2&+$5*(FRQQHFWRU
1-Disassemble the handset (
Proc Sheet 1 20 )
2-Replace the defective connector (see below)
5HI
3 - Replace the electronic board in the mobile phone (
Proc Sheet 1 20 )
4 -To test the replacement of the connector, it is necessary to:
a) Connect the mobile phone on SMT maintenance software (test Sheet 01)
b) Make real calls with a pedestrian handsfree Kit
5HIHUHQFH
c) Test the charge of mobile phone
5 - Standard test after repair
Procedure
Symptom
Test
REF MTB DTS 9- Indice B - December 09 2005
Page 5-41