Fiche Proc 1 13
myZ-5
5HPRYHDQG3ODFH
7KHXSSHUFDVLQJRIPRELOH
1/1
7RROV
-
Phillips screwdriver.
-
Plectrum
-
Gloves
3UHOLPLQDU\RSHUDWLRQ
1. Remove the battery (
Proc sheet 0 01
).
2. Remove the lower casing of mobile (
Proc sheet 1 01
).
3. Remove the equipped electronic board (
Proc Sheet 1 18
).
4. Remove the keypad of the lower casing of mobile (
Proc Sheet 1 04
).
5HPRYDOSURFHGXUH
1. Remove the four fixing screws from the upper casing of the lower slide (1).
2. Lift delicately the upper casing taking care of FPC (2).
3ODFHPHQWSURFHGXUH
1. Place the new upper casing beginning to introduce the FPC (3).
2. Screws to an adapted torque the four fixing screw (1).
)XUWKHURSHUDWLRQV
1. Place the keypad of the lower casing of mobile (
Proc Sheet 1 04
).
2. Place the equipped electronic board (
Proc Sheet 1 18
).
3. Place the lower casing of mobile (
Proc sheet 1 01
).
4. Place the battery (
Proc sheet 0 01
).
Upper casing of the lower slide
Risk of the procedure:
•
Damage the casing.
•
Break clips of casing.
Procedure
Symptom
Test
REF MTB DTS 9- Indice B - December 09 2005
Page 5-14