Proc Sheet 1 30
myZ-5
5HPRYHDQG3ODFH
7KH)3&
1/2
7RROV
- Phillips screwdriver.
-
Plectrum
-
Gloves
3UHOLPLQDU\RSHUDWLRQ
1. Remove the battery (
Proc sheet 0 01
).
2. Remove the lower casing of mobile (
Proc sheet 1 01
).
3. Remove the equipped electronic board (
Proc Sheet 1 18
).
4. Remove the keypad of the lower casing of mobile (
Proc Sheet 1 04
).
5. Remove the upper casing of mobile (
Proc Sheet 1 13
).
6. Remove the lower casing of FLAP (
Proc Sheet 1 26
).
5HPRYDOSURFHGXUH
1. Open the FPC connector (1).
2. Remove delicately the FPC (2).
3ODFHPHQWSURFHGXUH
1. Open the FPC connector (3).
2. Position delicately the FPC in the FPC connector (4).
3. Do the further operations.
)XUWKHURSHUDWLRQV
1. Place the lower casing of FLAP (
Proc Sheet 1 26
).
2. Place the upper casing of mobile (
Proc Sheet 1 10
).
3. Place the keypad of the lower casing of mobile (
Proc Sheet 1 04
).
4. Place the equipped electronic board (
Proc Sheet 1 18
).
5. Place the lower casing of mobile (
Proc sheet 1 01
).
6. Place the battery (
Proc sheet 0 01
).
Risk of the procedure:
•
Damage the casing.
•
Damage the FPC connector.
•
Damage the FPC.
Procedure
Symptom
Test
REF MTB DTS 9- Indice B - December 09 2005
Page 5-25