Proc Sheet 1 18
myZ-5
5HPRYHDQG3ODFH
7KHHTXLSSHGHOHFWURQLFERDUG
1/2
7RROV
-
Phillips screwdriver
-
Plectrum
-
Gloves
3UHOLPLQDU\RSHUDWLRQ
1. Remove the battery (
Proc sheet 0 01
).
2. Remove the lower casing of mobile (
Proc sheet 1 01
).
5HPRYDOSURFHGXUH
7KLVSURFHGXUHPXVWEHSHUIRUPHGE\DWHFKQLFLDQZLWKJORYHV
1. Dislodge the equipped electronic board with the plectrum (1).
2. Disconnect the FPC of the FPC connector (2).
3ODFHPHQWSURFHGXUH
1. Insert the FPC into FPC connector on the new equipped electronic board (3). (
7DNHFDUHRI)3&
FRQQHFWRUDQGLQDQ\FDVHGRQ¶WIRUFH
).
2. Place the equipped electronic board in its housing (4).
)XUWKHURSHUDWLRQV
1. Place the lower casing of mobile (
Proc sheet 1 01
).
2. Place the battery (
Proc sheet 0 01
).
Risk of the procedure:
•
Damage the equipped electronic board.
•
Oxide the equipped electronic board.
•
Damage the FPC connector.
•
Damage the FPC.
•
Procedure
Symptom
Test
REF MTB DTS 9- Indice B - December 09 2005
Page 5-16