- 14 -
MF 6990dn - Agoris C935
2 -
Installation
4
Load the sheets into the paper tray with the print
surface facing up.
5
Make sure the paper does not exceed the fill limit.
6
Adjust the paper guides against the side of the pile.
7
Close the additional paper tray.
8
Define the paper format and type used in the ma-
chine.
>
The machine automatically detects standard paper
formats. To check / define the format and type of pa-
per loaded, consult the section Paper settings [
26].
Starting up the machine
Connecting the machine
1
Connect one end of the telephone cable to the ma-
chine socket and the other to the wall telephone
socket.
2
Connect one end of the LAN network cable (not
supplied) to the machine port and the other to your
local network port for the machine.
3
Ensure that the On/Off button is on Off (position 0).
4
Connect the mains cable to the machine. Connect
the mains cable to the wall socket.
Notice
The tray can contain up to 500 sheets of
standard paper (80g/m² [22lb]).
WARNING
Before connecting the mains cable, you
must consult the Safety Instructions
[
125].
WARNING
The mains cable is used to disconnect the
machine from the power supply. As a pre-
caution, the mains power socket must be lo-
cated near the machine and easily
accessible in the event of danger.
