1-6
Installation
Date en cours : 11 juin 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFC 23260972-6_38xx Sagem GB\Installation.fm
,QVWDOOLQJWKHDGGLWLRQQDOSDSHUWUD\GHSHQGLQJRQPRGHO
+
Unpack the additionnal tray.
+
Pull the connector backwards and
remove its cover.
+
Check the three retaining pins of the
printer.
+
With the help of another person, place
the printer above the additional paper
tray.
+
Place the two metal plates on the right
and left-hand side of the printer.
+
Affix them using the two screws.
+
Remove the connector cover from the
rear of the printer, and connect the tray
connector.
+
Remove the tray connector cover and
attach it on the printer connector.
+
Position the right and left covers on the
machine sides.
Connector
Connector cover
Locating pins
Printer
Paper tray
Printer basis
Paper tray
Plastic screw
Attaching
metal plate
Connector
cover of
paper tray
Connector cover
of printer
Paper tray
connector
Left cover
Right cover
Installation.fm Page 6 Lundi, 11. juin 2001 5:42 17