1-2
Installation
Date en cours : 11 juin 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFC 23260972-6_38xx Sagem GB\Installation.fm
• Do not place the printer in direct sunlight, near radiators, air conditioning and in general in
areas that are too hot, dry, damp or dusty.
• Avoid areas with frequent vibrations.
• Avoid areas where water or other products could accidentally spill on the printer.
• Never try to access the hot parts (heater), or try to remove the cover (laser beam).
6HWWLQJWKHFRQVXPDEOHLWHPV
6HWWLQJWKHIRXUFRORXUWRQHUFDUWULGJHV
Your printer has 4 colour toner cartridges: Cyan, Magenta, Yellow and Black.
To install the starting cartridges :
+
Open the front cover of the printer.
+
Remove the cartridges from their packaging.
+
Repeat the following steps for each colour toner cartridge.
Caution -
A colour label identifies each cartridge. Place the cartridge in the housing with the
corresponding colour label. Exert no pressure when you insert the cartridge in the housing. Check
that you insert the cartridge of the right colour.
+
Gently shake the cartridge sideways to
event out the toner.
+
Remove the protection bar.
+
Install the toner cartridge. Align the
cartridge and slid it entirely in the
printer.
+
Each cartridge is inserted in the housing
which has the corresponding colour label
(E).
Installation.fm Page 2 Lundi, 11. juin 2001 5:42 17
