- 77 -
IN-WARRANTY FAILURE CHECKLIST
To assist with warranty troubleshooting, the following information is required. This data is needed to evaluate the
cause in an effort to eliminate any further failures.
Model No.:_____________________________________________________________
Serial No.:____________________________________________________________
Start-Up Date:_________________________________________________________
Failure Date:__________________________________________________________
Status When Failure Occurred (check one):
Power-Up___________ Running____________ Accel__________ Decel__________
Explanation of Failure ________________________________________________
Application Information (check Yes or No)
Input Transformer:
Yes______ No______
If Yes:
KVA____________________________
L1 Volts______ L2 Volts______ L3 Volts______
Power Factor Correction Capacitors: Yes______ No______
If Yes: Microfarrad_______________
Other Equipment on Same Power
Yes______ No______
If Yes, what?
Line Reactor on Input
Yes______ No______
Input Starter
Yes______ No______
Output Starter
Yes______ No______
Motor Overloads
Yes______ No______
Control Terminals Used (circle if used)
30A
30B
30C
FM
X1
X2
X3
FWD
REV
CM
11
12
13
C1
Function Codes Different From Factory Settings
Failure Message (see Section 4)
Latest Fault_____________ Previous Faults: No Message_________
Hz_________________
1._______________
A__________________
2._______________
V__________________
3._______________
After all of the Checklist information is acquired, contact the following number for assistance: (
941) 693-7200
When returning failed parts, reference the
RMA #
on the shipping documents that came with the replacement parts
,
and ship failed parts to:
Saftronics
, Inc.
,
Attn:
Repair
Dept.
, 5580 Enterprise Pkwy., Fort Myers, FL 33905.
Be sure to mark carton with RMA #.
Function Code
Setting
Function Code
Setting
