Instructions on wiring
!
WARNING
1.
When the drive is connected to power, connect it via a line-protection molded case
circuit breaker or an ground fault circuit breaker (residual current operated protective device).
Risk of fire!
2.
Be sure to connect the ground wire,
Risk of electric shock or fire!
3.
Ensure that a licensed specialist
performs the wiring work.
4.
Check before starting the wiring that the power is off (OPEN).
Risk of electric shock!
5.
Do not wire up the drive until it has been installed securely,
Risk of electric shock or injury!
6.
The drive must be grounded in accordance with the national and local safety codes,
Risk of electric shock!
!
CAUTION
1.
Check that the number of phases and the rated voltage of this product correspond to the
number of phases and voltage of the AC power supply.
Risk of fire!
2.
Do not connect the AC power supply to the output terminals (U, V, W).
Risk of injury!
3.
Check the output terminals (U,V,W) for the phase order and connect them to the motor
correctly.
Risk of fire!
4.
Do not connect a braking resistor directly to the DC terminals [P(+), N(-)].
Risk of fire!
5.
Noise is generated from the drive, motor, and wiring. Take care that this noise does
not cause malfunctions in peripheral sensors and equipment.
Risk of accident!
-5-
