![background image](http://html.mh-extra.com/html/barco/ngs-d200/ngs-d200_quick-start-manual_473502001.webp)
NGS-D200
1
2
3
4
5
NGS-D200
Quick Start Guide
NOTE:
If any accessories are missing or damaged, contact Customer Support for
an immediate replacement. Do not place any weight on top of the unit. It is not
designed to support weight and internal components can be damaged if objects
are placed on top of it.
The Device Discovery tool can be found at
http://www.barco.com/networktools
What’s in the box?
The following equipment is
shipped with the NGS-D200 unit:
1. NGS-D200
2. Power cord for Europe
3. Power cord for USA
4. 12 V DC power supply
5. SD card
2
Locate the device on the network
3
Setup Wizard
Device Discovery tool
Select NGS-D200
1. Default user name and password (password can be changed using wizard):
a. user name = admin (default)
b. password = _____________
(The password must contain at least 8 characters, 1 uppercase letter, a number and no special characters)
2. Choice of device type “Encoder/Decoder”
3. Management Server IP address/DNS name (if in managed mode)
4. NTP Server IP/DNS name
5. If not using DHCP:
a. IP address/DNS name
b. Gateway IP address/DNS name
c. Subnet mask
What you’ll need
Choose the device
serial number from the
list or enter the serial
number in the space
below to quickly
find the device.
Click the link to
access the NGS-D200
setup Wizard.
Note: The serial
number can be
found on the
back of the
device.
1890317522