The CFIP Lumina Series Full Outdoor Unit Technical Description and Configuration Guide
•
Rev. 1.3
•
© SAF Tehnika JSC 2010
97
8.2 Discovery Protocol Performance Examples
8.2.1 Discovery of IP Address and Firmware Version in Case The Subnet of
CFIP Unit is Unknown
For this purpose the comma
nd “dp sight <local_addr>” should be executed in „cmd‟.
Instead of <local_addr> place the IP address of your PC Ethernet adapter that is connected
to CFIP unit. Refer to figure below for example.
CIDR notation (routing prefix) is related to network mask that is also necessary in
order to manage CFIP unit. The IP address of your PC Ethernet adapter and CFIP unit should
be from the same subnet in order to manage the CFIP unit. In the table below some
examples are given for CIDR notation and subnet mask relation.
CIDR notation
Network mask
/24
255.255.255.0
/25
255.255.255.128
/26
255.255.255.192
/27
255.255.255.224
/28
255.255.255.240
/29
255.255.255.248
/30
255.255.255.252
(!)
Note that IP addresses of Ethernet adapter and CFIP units may belong to different
subnets. This command sends discovery messages on broadcast address 255.255.255.255
to all devices in network. All CFIP devices connected to this network are responding with its
own IP address/CIDR notation and firmware version.
