The CFIP Lumina Series Full Outdoor Unit Technical Description and Configuration Guide
•
Rev. 1.3
•
© SAF Tehnika JSC 2010
77
5.2.6 Performance Management Commands
It is also possible to view performance log in command prompt.
The list of available commands is the following:
Additional performance management commands in Telnet/serial interface
Command
Description
pm log
<interval> {<last rec count>|{<start
date>|<start time>|<end date>|<end time>}}
Lists performance management log with
selected
<interval>
of 1min, 15min or 1hr.
Allows choosing the number of last records to
be shown
(<last rec count>
) or to define start
and end time and date. Note that end time
and date values must be entered after
entering start time or date respectively.
pm select
{Up_TIME . Rx_LEVEL . Tx_LEVEL
. SYS_TEMPER . RADIAL_MSE .
LDPC_STRES.} | {ALL|NOT}
Allows selecting the system parameters to be
monitored and shown in the performance
management log.
pm logclear
Clears performance log.
pm threshold
stat | auto |
{{|Rx_LEVEL |
Tx_LEVEL | SYS_TEMPER | RADIAL_MSE |
LDPC_STRES} {min|max <value>}|auto }
Sets threshold levels for parameters from
where TS (Threshold Seconds) are counted
and shown in the performance log.
