The CFIP Lumina Series Full Outdoor Unit Technical Description and Configuration Guide
•
Rev. 1.3
•
© SAF Tehnika JSC 2010
58
4.6.2 QoS 802.1p Configuration
QoS 802.1p provides configuration of QoS 802.1p priority mapping. You are able to map
8 different traffic 802.1p values (0
– 7) into 4 priority queues (1 – 4).
1.
QoS 802.1p priority mapping
–
allows assigning queue values to specific 802.1p
values.
2.
Pressing “Execute configuration” applies changes made to the corresponding section
only for the local side CFIP Lumina
. If “Rollback on” is selected, configuration will be
reverted in case of erroneous configuration changes applied;
3. Writes to configuration file all the changes made on the whole page (command line
–
cfg write
);
4.
FODU returned -
in case of error or incorrectly entered parameter value, or other
problems on the whole page
– the info message is being shown here. Otherwise it
says “Ok”.
4.6.3 DSCP Configuration
QoS DSCP provides mapping of different traffic DSCP classes to priority queues.