The CFIP Lumina Series Full Outdoor Unit Technical Description and Configuration Guide
•
Rev. 1.3
•
© SAF Tehnika JSC 2010
27
Figure 2.17.
STEP 5. Checking settings and executing configuration
To verify the settings, we can go to „Status‟ or the main screen, which is the first option in
the navigation panel. If there are no „red fields‟, everything is set correctly and the link is up.
2.4 Command Prompt Interface
CFIP equipment can be monitored and configured by using command interface described
in this chapter.
This process is performed by connecting to Telnet terminal via ODC port; Telnet
management supports only one client.
Command line management interface offers wider configuration and monitoring
functionality. The available commands for Telnet management are found in detailed
explanation of Web GUI windows, as well as in tables of additional commands.
(!)
−
To end Telnet session press Ctrl+D. Opening the session again, the prompt will appear
to enter username and password.
− For default (factory) usernames and passwords please refer to
Chapter 6.1.
