PSI
Fit chafing guards
over the 5th bow’s latch fittings to minimize the risk of
wear on the top
fabric when the top is down.
Parts:
LH Chafing Guard
45 59 431
RH Chafing Guard
45 59 456
Figure
8. Fitting Chafing Guards to 5th Bow Latch
Operate the top using the “ROOF” switch until it is in the position shown above. The top, 5th bow and
neau cover should be fully raised.
2.
A nut is welded to the top of the latch fitting. On a number of cars there is also an extra loose nut. Where
fitted, this nut must be removed. See Figure 8.A..
3.
Fit the chafing guard on the latch fitting. Make sure that the grooves in the guard fit on the edges of the latch
bracket. See Figure 8.B.
Page 9 of 24
