Convertible Top Troubleshooting Guide
Messages
Additional information regarding SID messages
can be found
in Service Manual
olet, page 40.
1. “Check Soft Top” while top is operating, top works O.K.
a. Check for
Follow appropriate fault tracing procedure in Service Manual
Cabriolet.
b. Tonneau latch microswitches not closing
at the same
time?
Monitor Tonneau latch microswitches with Tech
2.
NOTE: In Tech 2 software version 14.000, the Tonneau latch
switch positions are REVERSED.
Adjust striker and latch as per Service Manual
Cabriolet, pages 127
128.
2.
“Check Latches”
a. Are the header latches closed?
If the header latches are not properly closed, SID will display the “Check
Latches” message as soon as TSAS receives a wheel speed signal.
Monitor the header switches with Tech 2. Make sure both switches are
closed when the 1 st bow is latched, and open when the 1 st bow is unlatched.
b. Are the 5th bow latches closed?
If the 5th bow latches are not properly closed, SID will display the “Check
Latches” message as soon as TSAS receives a wheel speed signal.
3. “Check Trunk”
Is the hood stowage bag lowered?
Monitor the trunk bag switches with Tech 2. Make sure both switches are
open with the bag lowered.
4. “Close Trunk Lid”
Is the trunk closed? Is the trunk light switch operating properly?
Monitor the trunk light switch with Tech 2. Make sure that the trunk light
switch is open with the trunk closed, and closed with the trunk open.
