900 Convertible Top Troubleshooting Guide
bow
won’t
proper/y
a. 5th bow latch motor jammed or inoperative?
the car has the “older” design 5th bow latch motor, replace 5th bow latch
motor. See MI 811-1758.
Use Tech 2 to “Activate&h Bow Latch Motor”. If motor does not operate cor-
rectly, perform electrical tests. There may be a wiring fault.
b. Misaligned strikers?
Adjust strikers.
c. Incorrect programming?
Reprogram top according to PSI
27.
does not beep when top is fully raised
a. SID incorrectly programmed?
Program SID for “hood”.
See Service Manual
Electrical system, SID for programming procedure.
b. 5th bow latch microswitches or Tonneau cover latch microswitches not
closing properly?
“Check Soft Top” message may appear on SID if one Tonneau switch is open
and the other is closed.
Read switches with Tech 2. Adjust or replace as necessary.
1 8
