Ryobi RLT254CDSO, User Manual, Page: 21 / 372

19
English (Original instructions)
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and
the operator should pay special attention to avoid the
following:
■ Injury caused by vibration
– Hold the product by designated handles and restrict
working time and exposure.
■ Exposure to noise can cause hearing injury
– Wear hearing protection and limit exposure.
■ Eye injury due to flying debris
– Wear eye protection at all times.
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud’s syndrome.
Symptoms may include tingling, numbness and blanching
of the
fi ngers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Ensure that the product is correctly located in a
designated working position before operating the
product.
■ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged
periods, ensure you take regular breaks.
KNOW YOUR PRODUCT
1. Primer bulb
2. Choke lever
3. Fuel cap
4. Starter grip
5. Throttle lock
6. Ignition switch
7. Throttle trigger
8. Rear handle
9. Front handle
10. Shaft
11. Grass deflector
12. String head
13. Cutting line
14. Idle speed screw
15. Knob
16. Hanger cap
17. Bolt
18. Wing nut
19. Bump knob
20. Lower housing
21. Spool
22. String guide
23. Spring
24. Nut
25. Upper housing
26. Air box cover
27. Air filter
28. Spark plug
29. Metal spark plug boot
30. Rubber protect boot
31. Starter bit
32. Switch button
33. F/R button
34. Electrical starter
35. Starter bit shaft
36. Lock button
37. Guide recess
38. Best cutting area
39. Direction of cutter rotation
40. Screw
41. Mounting bracket
42. Tab
43. Slot
ASSEMBLY
UNPACKING
This product requires assembly.
■ Carefully remove the tool and any accessories from
the box. Make sure that all items listed in the packing
list are included.
■ Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.